Focus on transporter since 2010

Slag Pot Carrier and Slag Pot

 

 

Slag Pot Carrier‌ (SPC) is a heavy-duty, hydraulically operated vehicle designed for the safe transport and tipping of molten slag in steel plants and foundries. Its primary role is to handle high-temperature slag (typically exceeding 1,400°C) generated during steelmaking, ensuring efficient disposal while minimizing thermal exposure risks to operators and equipment.

Ladle Carrier

 

 

Ladle carrier is usally used for transporting steel ladle filled by steel liquid in steel plant. The refractory material is installed inside of steel ladle for high temperature. We design two driving cabin for easy driving and steering. Each cabin is covered by a steel roof for safety. This kind of tyre type of ladle transporter is more flexible than rail type of transporter. It is widely used in the steel plants.

SOLUTIONS 

After 15 years of development, we have established ourselves as a professional brand and secured a prominent position within the industry.

넳 넲

Steel Plant Solutions

Slag Pot Carrier, Scrap Transporter, Scrap Dumping Truck, Plate Transporter, Ladle Carrier, Casting Crane,etc

Steel Plate Transporter

 

 

Steel plate/coil transporter is a good solution used in steel plant for transporting hot/cold slab, steel plate and steel coils. The huge capacity and reliable performace are appreciated by steel plants. The capacity can reach 700t at usual. The running speed can reach to 5-10km/h. The multi mode steering will make operation simple and fast.

Engine:                        Cummins/Scania/CAT

Transmission:              Dana

Drive Axle:                   Kessler

Motor/Reducer/Pump: Rexroth/Danfoss

Controller/PLC:            Rexroth 

Lubrication:                  SKF

​​​​​​​REFUSE TO USE FAKE BRAND AND COMPONENTS FOR OUR EQUIPMENT, SPARKE FIRST!

Pipe Carrier/Lifter

 

 

The pipe carrier/lifter is usually used in steel plant to life and transport steel pipes. It has lifting crane functions and transportation functions. When the pipe production is finished, this machine can lift and move to the storage yard. Its effcient lifting and flexiable moving is highly appreciated by customers. The capacity and span can be customized by our factory and match the customer's site condition. 

Refractory Material Removing Machine

 

 

Before EAF, the last generation of furnace usually use ladle to transfer steel liquid. As the liquid temperature is very high, for avoiding the damage to the ladle, we install refractory material inside for protecting ladle. After some time of operation, the refractory material needs to be removed and change new one. So we designed and developed this machine to remove the refractory material quickly.

Ladle Trailer

 

 

The ladle trailer is pulled by a tractor or truck to transport hot ladle in steel plant. As the trailer has no power pack, comparing with self propelled ladle carrier, the price is much lower. When the customer has very limited budget, maybe this trailer will be a optional solution for the transportation of ladle. The load capacity and  axlelines can be designed based on ladle dimension and weight.